High temperature thermal oil pump seal features

High-temperature heat-conducting oil pump seal features: (1) the combination of packing seal and mechanical seal, packing seal with high temperature filler, with good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance The cemented carbide material, to ensure the sealing performance under high temperature conditions. (2) Imported polytetrafluoroethylene (referred to as PTFE) lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely strong corrosion resistance. High-temperature heat transfer oil pump is an ideal hot oil circulation pump or as a Heat transfer pump, heat exchange equipment is the ideal matching pump. Structural features of high-temperature Heat Transfer Oil pump: High-temperature heat transfer oil pump with self-heating cooling structure, changing the traditional water cooling structure, so that the simple structure, small size, saving running costs, good performance, reliable use of our country on the basis of digestion and absorption of foreign pumps Developed second-generation products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, and the same motor mounted on the base. The high-temperature heat-conducting oil pump is supported by a structure of double-ended ball bearing support. The front end is lubricated with grease. The rear end is lubricated with grease. The middle part has a guide pipe for observing the sealing and recovering the heat-conducting oil at any time.